| Model | QC-548M2F-S | QC-548M2F-M |
|---|---|---|
| Max. Capacity | 5 kN | |
| Units |
Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg |
|
| Force Resolution | 31 bits | |
| Force Precision | 1/100,000 | |
| Test Stroke(w/o grip) | 400 mm | 800 mm |
| Stroke Resolution | 0.0001 mm | |
| Speed Range |
Low Speed Mode : 0.0005~9mm/min High Speed Mode : 0.5~3000mm/min |
|
| Speed Accuracy | Lower 1% | |
| Data Sampling Rate | Max.1200Hz | |
| Space Between Columns | 80 mm | |
| PC-Port | RJ45(TCP/IP) | |
| Motor Type | Servo Motor | |
| Rigidity | 4.1 kN/mm (Vertical Rigidity) | |
| Hardware protection | Upper/lower limits, emergency stop button | |
| Power Supply | Single Phase, 200 ~ 240VAC，5A | |
| Dimension | ||
| Weight | 65 kgf | 80 kgf |
COMETECH QC-548M2F Máy kiểm tra độ bền kéo (nén) được điều khiển bằng máy tính
Product Serial : QC-548M2F
QC-548M2F-Computerized Tensile (compression) Testing Machine
Confirm to ISO 7500-1, ASTM E4, ASTM D-76, DIN5122, JIS B7721/B7733, EN 1002-2, BS1610, GB T228 Standard
Confirm to ISO 7500-1, ASTM E4, ASTM D-76, DIN5122, JIS B7721/B7733, EN 1002-2, BS1610, GB T228 Standard
QC-548M2F table type machine has capacity up to 5kN. It offers a quiet testing environment and accurate test result. On stand-alone mode, it can do tensile test, compression test, bending test and so on. Transmission system needs little maintenance even after being used for a while. The machine has a separate electricity control that avoids interference with other transmission components for a higher testing stability. Upgrading of the controller system is also easily practicable.The precise hand wheel controls grip’s movement at a small scale. With this tool, users can move the grip to a precise position. The force signal is emitted and received instantly so as to prevent overload. A port is reserved for signals that are outside the machine for a more flexible operation.
Industry:Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electron, Package, Medical, Construction