| Model | D1 Controller |
|---|---|
| Power force(DC) | 6V |
| Control signal input | Two sets of input signal for selection Stress sensor: 4~20mA Force sensor: 1.0mV/V、1.5 mV/V、2.0 mV/V、3 mV/V、4 mV/V |
| Two sets of Encoder signal input | |
| Input signal: upper limit, lower limit, emergency stop, go up, go down, full speed | |
| Control signal output | One set of breakpoint output signal |
| Communication Interface | TCP/IP RJ45 Connecting Cable |
| Load cell Revolution | 1/10,000 |
| Encoder signal voltage | 5V |
| Encoder signal mode | Single- ended (Open Collector)、differential square wave(Line Driver) |
| Display panel | 7 inche of TFT Color touch panel |
| Language selection | Chinese, English, Japanese |
| Data assess | Can use USB to proceed with data access (can export test data to Excel for further data analysis) |
| Specified software is optional for data access | |
| Data sampling rate | 3、5、20、50、100、500、1200 |
| Interface function | Data Display: Force , Stress, Torque, Displacement, Time |
| Graph Display : Force, Displacement, Time | |
| Date Analysis : maximum force, deformation percentage at maximum force point, stress at maximum force point, percentage of elongation at maximum force point, force at break point, deformation percentage at break point, stress at break point, percentage of Elongation at specified break point, interval average load, Max. Force…..so on. | |
| Unit changeable (Metric system or imperial system) | |
| Calibration setting | Calibrated parameter setting can be provided |
| Can be used on various capacity of load cell and no need to recalibration after replacement. |
Cometech D1 BỘ ĐIỀU KHIỂN D1
Product Serial : D1
D1 CONTROLLER
Description:
D1 controller is basically designed for material testing, which can analyze load cell, torque sensors, pressure sensors, encoder and so many varieties of signals.Every kind of units can be changed according to user’s demand when using it. It will display the real time value and the short timing data. it will has a real-time display or record the short time data. Data can be restored and exported to EXCEL sheet for further analysis by USB. Or the specified software can also be an option for proceeding with further analysis. When customer has a special requirement, it also could be modified and designed based on their needs.
D1 controller is basically designed for material testing, which can analyze load cell, torque sensors, pressure sensors, encoder and so many varieties of signals.Every kind of units can be changed according to user’s demand when using it. It will display the real time value and the short timing data. it will has a real-time display or record the short time data. Data can be restored and exported to EXCEL sheet for further analysis by USB. Or the specified software can also be an option for proceeding with further analysis. When customer has a special requirement, it also could be modified and designed based on their needs.
Appropriate using occasion:
Simple material testing device, various forces display, teaching analysis, data measurement for industries