| Model | QC-603A | QC-603C |
|---|---|---|
| Material | Rubber, soft plastic (shore A under 90 degree), leather | Rigid plastic (Shore A above 90 degree), fabric |
| Compression Platen Size |
Upper platenφ145 mm ectangle platen for option) Lower platen260 x 230 mm |
Upper platen:35 ×16cm Lower platen:35 x 18cm |
| Stroke | 103 mm | 20 mm |
| Output force | 900 kg | 3000 kg |
| Power supply | Pneumatic(excluding compressor) | |
| 3 ~ 6 kg/cm² | ||
| Accessory | Cutting board | |
| Optional | Cutter All kind of cutter type, please refer to as below or optional |
|
| Feature | ※easy to operate, power-saving, time-saving ※Dual switches to increase safety factor |
|
| Dimension | 35 × 42 × 63 cm | 42×45×105 cm |
| Weight | 55 kg | 80 kg |
Cometech QC-603A QC-603C Đục mẫu bằng khí nén
Product Serial : QC-603A、QC-603C
Pneumatic Specimen Punch
QQC-603A of power is pneumatic with hand safety switch design, so there will be no security problem in operation. The tester with all kind of cutter can quickly cut out various shapes of specimen. It is suitable for paper, rubber, plastic and leather…etc. of all kind of soft material. It can match with all kind of cutter to cut different type of specimen
QC-603C has been improved from QC-603A manual specimen punching machine, the main change are using empty oil conversion to increase whole machine of output and can cutting hard material. This tester of power is pneumatic with and safety switch design and there will be no security problem in operation. In addition to use soft material, also applicable in textile, plastic sheet, high toughness and large thickness sample.
These series models not only can cutting specimen but also do lamination material. The feature is small size with easy operation.
Industry: Rubber, Plastic, textile